Full Automatic Vial Making Machine

• Type: Medicines Packing Material Equipment
• Finished Dosage Form: Vial
• Precision: High Precision
• Certification: GMP, ISO
• Voltage: 380V
• Computerized: Computerized
• Model NO.: ZP18C
• Customized: Non-Customized
• Condition: New
• Warranty: 1 Year
• Transport Package: Wooden Package
• Specification: 1400x1300x1440mm
• Trademark: Sinopharm
• Origin: China
• Production Capacity: 1500 PCS/H

Product Description

Vial making machine

Introduction
Improved based on same type bottle-making machine, this machine is higher efficient for producing vial bottle.
Parameters

Model		ZP18C
Station No.		18
Production capacity(Westwood bottle)		>1500 pcs/h
Bottle shape dimension	Body diameter	Ø14-32 mm
	Body height	25-80 mm
	Bottleneck inner diameter	Ø6-20 mm
	Bottleneck diameter	Ø12-28 mm
Reduction motor	Model	CH-28-400-5/1
	Model	CV-22-200-55/1X2
	Total power	0.8 KW
	Voltage	380/220 V, Delta connection
Shape dimension		1400x1300x1440mm
Installation size		710x620
Operating weight		865 kg
Gas pressure		0.012 MPa
Oxygen pressure		0.014 MPa
Air pressure		0.02 MPa

 
Technical Characteristics:

1. The linear guide instead of dovetail groove in the bottle fabricating group is a revolutionary breakthrough.
2. The sliding system was changed as the linear bearings instead of the dovetail groove in Part B the clamped group for fabricating the bottom of the bottle, and the overcame many difficult such as the loose, the wear, easy to get stuck and difficult to maintenance for the dovetail groove.
3. The drill chuck type claw in Part A can fine-tune their concentricity.
4. The third generation anti-mounted torsion spring-type chuck in Part B
5. The power from the dual synchronous motor box replace the original turbo tank, eliminate the vibration between plate A and B, the spills of oil and maintenance problems thoroughly
6. The holding tube system promotes the rate of finished products and reduces the workload of the workers.
7. The dip in Part B is a measure for avoiding the oil pollution forf1nished bottle.
8. The modulated cervical vertical-shaft and fine-tune neutral point for the movement in the machine. Because of the deficiencies in the original model, it can·t achieve these functions.
9. The GCr15 bearing steel intermittent cams do not always repail1 withlonglife.
10. The transmission was improved as the alloying spiral bevel gear instead of straight bevel gear alloy, greatly increasing its servicelife and reducing the noise
     

Our Company



China Sinopharm International (Shanghai) Co., Ltd. is a comprehensive commercial service enterprise centering international pharmaceutical business.

It is a wholly-owned subsidiary under China Sinopharm International Corporation and is affiliated to China National Pharmaceutical Group Corporation (referred to as "Sinopharm Group"), a Fortune Global 500. Founded in 1985, the company has an net asset of nearly 200 million yuan. It has complete commercial facilities and 23,000 square meters of properties including an office building and shopping malls in Shanghai's West Nanjing Road commercial area and multiple warehouses. International business are carried out based on the platforms of Sinopharm Group and Sinopharm International Pharmaceutical and aims to spread China's high-quality pharmaceutical products and services to the world.

Through close cooperation with major domestic pharmaceutical companies, high-quality pharmaceutical products and overall solutions are provided to overseas customers. We are a well-known pharmaceutical enterprise in China with partners extending to more than 80 countries and regions around the world.